EAA Builders Log Website
EMail address:
Password:
- Lost my password
close
EAA Builders Log
(An EAA website).
Help
Contact Us
About
Sign Up
Login
Project:
Sportsman
-
Listing of Entries
(Please mouse-over any icon to get a description of that function).
Categories
Show All Entries
- (661)
Rudder (III)
- (1)
Horiz S (IV)
- (11)
Elevator (V)
- (32)
Wing LH (VI)
- (107)
Wing RH (VI)
- (82)
Aileron(VII)
- (38)
Flaps (VII)
- (32)
Fuselage (VIII)
- (67)
Systems (IX)
- (113)
-
Step #115 - Route...
-
Step 102 - route...
-
Step 102 - route...
-
Step 102 - route...
-
Parking Brake option...
-
Step 101 - Route...
-
Step #108 - Route...
-
Step #7 - Install...
-
Step #107 + 108 -...
-
Step #106 - Mount...
-
Step #106 - Mount...
-
Step #105 - Install...
-
Step#104 - Drill...
-
Step #103 -...
-
Step #106 - Mount...
-
Step #103 -...
-
Step 100 - install...
-
Step #99 - Install...
-
Step #86 - Check...
-
Step #85 - mount...
-
Step #84 - Mount...
-
Step #83 - Install...
-
Step #82 - Mount...
-
Step #81 - Mount...
-
Step #80 - mount...
-
Step #79 - Mount the...
-
Step #78 - Mount...
-
Step #76 Mount tubes...
-
Step #75 Install...
-
Step #74 - Install...
-
Step #74 - Install...
-
Step #74 - Install...
-
Step #73 - Drill and...
-
Step #72 - Insert...
-
Step #71 - Support...
-
Install nutserts on...
-
Step #79 - Cut cove...
-
Step #79 - Cut cove...
-
Step #75 - Install...
-
Step #75 - Install...
-
Step #74 - Rivet...
-
Step #74 - Rivet...
-
Step #74 - Rivet...
-
Step #74 - Rivet...
-
Step #74 - Rivet...
-
Step #74 - Rivet...
-
Step #74 - Rivet...
-
Step #74 - Rivet...
-
Step #74 - Rivet...
-
Step #74
-
Step #74 - Rivet...
-
Step #72 - Cleco...
-
Step #70 - Install...
-
Step #69 - Install...
-
Step #70 - Install...
-
Step #61 - Fit the...
-
Step #60 - Install...
-
Step #67 - Drill the...
-
Step #64 - Route...
-
Step #63 - cut...
-
Step #58 - install...
-
Step #56 - Cut hole...
-
Step #59 - Position,...
-
Step #57 - Position...
-
Step #56 - Cut hole...
-
Step #66 - Install...
-
Step #53 - install...
-
Step #55 - Drill...
-
Step #51 - drill...
-
Step #49 - apply...
-
Step #69 - Install...
-
Step #67 - Drill the...
-
Fuel Tank padding
-
Step #66 - Install...
-
Step # 65 - Drill...
-
Step #63 - cut...
-
Step #61 - Fit the...
-
Step #4 - Fabricate...
-
Step #60 - Install...
-
Step #58 - install...
-
Step #57 - Position...
-
Step #59 - Position,...
-
Step #57 - Position...
-
Step #56 - Cut hole...
-
Step #55 - Drill...
-
Step #54 - Make...
-
Step #53 - install...
-
Step #52 - test fit...
-
Step #51 - drill...
-
Step #50 - fit test...
-
Step #49 - apply...
-
Step #25 - Install...
-
Step #25 - Install...
-
Step #24 - Install...
-
Step #24 - Install...
-
Step #23 - Install...
-
Step #22 - Fabricate...
-
Step #21 - Complete...
-
Step #20 - Install...
-
Step #19 - Install...
-
Step #18 - Fab and...
-
Step #18 - Fab and...
-
Step #13 - 17...
-
Step 12 - Install...
-
Step #3 - 7 Rudder...
-
Step #3 - 7 Rudder...
-
Step #11 - install...
-
Step #10 - Assy flap...
-
Step #9 - Install...
-
Step #8 - Assy...
-
Step #3 - 5- Make...
-
Step #2 - Mount...
-
Step #1 - Drill...
Avionics
- (13)
Engine
- (1)
Inspection
- (2)
Interior Finish
Lighting
- (1)
Paint / Decals
- (5)
Propeller
- (1)
Kit INVTRY
- (5)
Research
- (6)
Tools
- (1)
Workshop
- (13)
Wings
Final (X)
- (126)
FWF (X)
- (2)
Phase 1
- (2)
Builder Name:
Kyle Stone
-
Project:
Glasair - Sportsman 2+2
-
VIEW REPORTS
Total Hours:
1859.9
Start/Last Date:
Jul 03, 2019 - Jun 30, 2022
Engine:
Lycoming IO-390-EXP
Panel:
Garmin G3X w/ GNX375 IFR nav, GNC 255 NAV/COM
Friendly URL:
https://eaabuilderslog.org?s=Sportsman
Home or Last Project Picture
Nov 29, 2020
Step #76 Mount tubes and tires on main wheel
- (1 hour)
Category: Systems (IX)
I will not be using these tubes and tires for anything other than building as they are from 2006...too old for me to trust my life on. I'lll add bigger tires as I get closer to the test flight.
NOTE: This information is strictly used for the EAA Builders Log project within the
EAA organization
.
-
Policy
-
© Copyright 2024 Brevard Web Pro, Inc.